Skip to Content
Starlight

Keyboard & mouse

Every shortcut and mouse gesture in Starlight, area by area. The command palette (/) also shows the key of each action.

Each row shows the Mac key first, then the Windows key after the slash. Letter keys, digits, arrows, Space, Esc and / are the same on both. For the menu bar and the right-click menus, see Menus. Words such as comp, keyframe and ease are explained in the Glossary.

Where a key goes

The same key can do different things. It depends on where the pointer is and what has focus.

You are typing in a field
Letter keys type text. The shortcuts for the palette, compose, Find, export, open, reload, new project, Settings, save, the next and previous scene, and the Claude panel still work.
On a Mac these shortcuts use ⌘ only. A ⌃ key keeps its text job in a field. For example, ⌃K deletes to the end of the line, and it does not open the command palette.
Some fields keep almost every key: a marker's name, a Claude tab's name, a comp's name on the node graph, and a sticky note. Only these keys still work there: ⌃` / Ctrl+`, ⌘K / Ctrl+K, ⌘/ / Ctrl+/, ⌘S / Ctrl+S, ⌥⌘S / Ctrl+Alt+S, ⌘PageDown / Ctrl+PageDown and ⌘PageUp / Ctrl+PageUp. Press ⏎ / Enter or Esc to leave them.
⌘Z / Ctrl+Z undoes your typing. ⌘S / Ctrl+S saves from a field too: Starlight takes the value you typed first (as ⏎ / Enter would), then saves. This is also true in the scene and comp rename bars. ⌘PageDown / Ctrl+PageDown and ⌘PageUp / Ctrl+PageUp take the value first too.
Only a field that you type text in counts. A checkbox, a slider, a colour well or a button is not a text field: after you click one, Space, g and Delete still work. A slider keeps the arrow keys, Home, End, PageUp and PageDown. A dropdown list keeps its keys while it has focus.
Focus is inside a panel
The panels are Properties, Assets, Generations, Glimpse and Claude. In a panel, a key pressed alone (with no ⌘ / Ctrl) acts only in that panel. Shortcuts with ⌘ / Ctrl still work.
Two kinds of single keys still go to Starlight from a panel: Space (play or pause) and the panel keys (⇧T, ⇧P, ⇧A, ⇧G, ⇧R, ⇧S). They stay in the panel while you type in a text field. Space on a button plays or pauses. It does not also press the button.
In Glimpse, the walk keys stay in Glimpse while you walk: W A S D Q E and the arrows, also with ⇧ / Shift (it walks faster). So ⇧A and ⇧S walk there, and do not open a panel. Glimpse does not use Space, so Space plays or pauses there too.
Esc closes the panel, but not while you are in a text field.
The pointer is over the timeline
The timeline's own keys come first: ⌥[, ⌥], s, d, n, [, ], +, −, 0, \, the arrows, ⌘C, ⌘V, ⌘D and Esc. Away from the timeline, these keys do their normal job.
One exception: keyframes that you selected in the timeline. ← / →, ⌫ / Backspace and Esc act on them wherever the pointer is.
The pointer is over the canvas or the node graph
The arrow keys and ⇧1 / Shift+1 act on the area the pointer was over last: the canvas or the node graph.
Over the canvas, the arrow keys move the selected layer or surface. Over the graph, or with a comp or clock selected, they move from node to node. With nothing selected, ← / → step one frame. ⇧1 / Shift+1 fits the area.
Something is open on top
The palette, a sheet, Settings, the Projects screen or a generation preview gets the keys first. Esc closes it.
In a dialog, ⌃` / Ctrl+`, ⌘K / Ctrl+K and ⌘/ / Ctrl+/ still work. They close the dialog first, as Esc does. Then they go to Claude, or open the command palette. A question that waits for your answer keeps these keys until you answer it. While a dialog is open, Edit › Undo, Edit › Redo and Scene › Next Scene / Previous Scene do not change the scene behind it. In a text field of the dialog, ⌘Z / Ctrl+Z still undoes your typing.
In the help, Esc closes the help. ⌃`, ⌘K, ⌘/, ⌘S and ⌘PageDown / ⌘PageUp (with Ctrl on Windows) work in the help too. ⌘Z / Ctrl+Z in the help's search box undoes your typing, not a scene edit.
The Stage panel, like every panel, keeps the keys you press inside it. Click inside it to give it the keys, and click the canvas to take them back. In the Stage panel, Esc goes back one step at a time, then closes the panel. A text field in it keeps its own keys.
The Claude terminal
Your typing stays there: letters, Space, the arrows, Delete, Esc, and on a Mac every ⌃ + letter.
On a Mac every ⌘ shortcut still works, except ⌘C, ⌘V, ⌘X and ⌘A: they copy, paste, cut and select in the terminal.
On Windows, Ctrl+K, Ctrl+/, Ctrl+,, Ctrl+S, Ctrl+PageDown, Ctrl+PageUp and F11 still work. Every other Ctrl + letter goes to Claude.
⌃` / Ctrl+` closes the panel, and ⇧Esc / Shift+Esc gives the keys back to the canvas (Keys in the terminal).
A sticky note
Every other key stays in the note, ⌘Z / Ctrl+Z too. Esc or ⌘⏎ / Ctrl+Enter leaves the note.

File, save and export

Keys for projects, saving, export and Settings. See Projects, Save and Export.

⇧⌘N / Ctrl+Shift+NMake a new project
⌘O / Ctrl+OOpen a project. On a Mac, pick its folder or its project.yaml. On Windows, pick its folder
↑ / ↓ on the Projects screenMove through your projects. ⏎ / Enter opens one. Esc closes the screen, when a project is open. ⇧⌘N and ⌘O work here too
⌘R / Ctrl+RReload the project from disk (File › Reload Project from Disk). If any scene has unsaved edits, it asks first and keeps them as recovery drafts
⇧⌘R / Ctrl+Shift+RForce-reload the whole app (Help › Troubleshooting › Force Reload App). It asks first, and keeps unsaved edits as a recovery draft
⌘S / Ctrl+SSave the open scene and where the surfaces sit on your canvas. It also makes a version (a snapshot you can go back to). Works from anywhere: a text field, a list, the palette, the Claude terminal
⌥⌘S / Ctrl+Alt+SSave All: every scene with unsaved changes (File › Save All). Each scene is its own version
⌘E / Ctrl+EOpen the export sheet for this scene
⏎ / Enter in the export sheetStart the export (⌘E / Ctrl+E again does the same). Esc closes the sheet
⇧⌘E / Ctrl+Shift+EExport the reel: every scene in order, one file per surface, with the export sheet's last settings
Esc while exportingFirst closes what is open and clears the selection. With nothing else open, it asks: Cancel the export? The finished surfaces are kept. Click Cancel Export to stop, or Keep Exporting
⌘, / Ctrl+,Open Settings. Press it again, or Esc, to close it
?Open this help (not while you type in a field). Esc, ✕ or a click outside closes it
⌘Q (Mac)Quit Starlight. With unsaved changes, it asks Save changes? first (Save changes before you leave)
⌘H / ⌥⌘H (Mac)Hide Starlight / hide the other apps
⌘M / Ctrl+MMinimize the window (Window menu)
Ctrl+W (Windows)Close the window (Window menu). This quits Starlight. With unsaved changes, it asks Save changes? first

Edit and select

Keys that change the selected layers. They work on the canvas, in the node graph and in the timeline.

⌘Z / Ctrl+ZUndo the last change to the scene (Undo and redo). In a text field, it undoes your typing
⇧⌘Z / Ctrl+Shift+ZRedo the last change you undid. On Windows, Ctrl+Y (Edit › Redo) does the same
⌫ / BackspaceDelete the selected layers, or the selected effect. Delete works too. If keyframes are selected in the timeline, it deletes the keyframes. A layer locked in the timeline is kept (Hide, solo or lock a layer)
bBypass the selected layers: switch off what each one adds. A picture, shape, text or video hides. A transform or group keeps showing its layers, which keep playing, without its own position, animation and effects. On a selected effect, bypass only that effect. On a comp's root, bypass the whole comp
⌥B / Alt+BA/B on the selected layers: show a clip's original or its version, or show a layer live or from its pre-render. Press it again to switch back. Only the view changes: the scene does not change, and nothing is saved
⌘] / Ctrl+]Bring the layer forward one step
⌘[ / Ctrl+[Send the layer backward one step
⇧⌘] / Ctrl+Shift+]Bring the layer to the front
⇧⌘[ / Ctrl+Shift+[Send the layer to the back
⇧M / Shift+MDraw a mask on the selected layer with the pen (Pen and paths)
⌘C / ⌘V / ⌘DCopy, paste and duplicate layers: only with the pointer over the timeline (Timeline keys). In a text field, copy and paste text
⌘F / Ctrl+FFind a node at any graph level and jump to it. Press it again to close Find. Over Properties, it filters the fields instead. In the scene list, it goes back to the list's search field and selects its text
Type in FindFind matches the name and the path of each node. It shows up to 60 matches
↑ / ↓, ⏎ / Enter in FindPick a match, then jump to it. The graph goes into the comp that holds it. Esc, or a click outside, closes Find
EscClose the top thing that is open: this help, Find, the scene list, the versions list, then the timeline. With nothing open, clear the selection. If you went inside a comp with a double-click on the canvas, Esc also takes you back out. While exporting, and only when none of this is left to do: ask to cancel the export

Playback

Keys that play and step through time. See Transport & playback.

SpacePlay or pause. With a work area set, only that part plays
⇧Space / Shift+Space · keypad 0Cache the work area (the whole loop without one), then play it in real time from memory (RAM preview). Press again to stop caching
, / .Step one frame back / forward, whatever is selected. Add ⇧ / Shift for 10 frames
← / →Step one frame when nothing is selected, or when the pointer is on a clock dial. With no node selected and the pointer over the canvas or the node graph, they step also when keyframes are selected in the timeline. Add ⇧ / Shift for 10 frames
j / kGo to the previous / next keyframe: of the selected layer, or of the whole scene. The playhead stops at the first and the last keyframe (Go to the previous or next keyframe)
Home / EndGo to the first / last frame of the loop. Audio and video go there too. On a Mac laptop, use fn + ← / →
⇧F / Shift+FGo to the first frame, and keep playing or stay paused. It works with the pointer over the canvas, the graph or the timeline
i / oSet the start / end of the work area (the part that loops) at the playhead. They work anywhere, but not while you type in a field or work in a dialog. Click × on the loop chip to clear it
Click ▶ or ⏸ at the bottom left of the canvasPlay (▶, shown while paused) or pause (⏸, shown while playing)
Right-click the scene dial, ▶ or the timeThe transport buttons: play, frame steps, keyframe and marker jumps, the work area (Use the clock dials)
Click the time at the bottom left of the canvasShow time in seconds or in frames
Scroll over a clockStep one frame for each click of the mouse wheel. Add ⇧ / Shift for 10 frames. A clock is ▶ or the time at the bottom left of the canvas, the time in the timeline's header, or a dial in the node graph (Scrub to a time)

Panels, view and window

Keys that show and hide panels and change the view. See The workspace.

gShow or hide the node graph
⇧T / Shift+TShow or hide the timeline, in the view you used last
⌥T / Alt+TSwitch the timeline between its layers view and curves view
⇧P / Shift+PShow or hide Properties
⇧A / Shift+AShow or hide Assets
⇧G / Shift+GShow or hide Generations
⇧R / Shift+RShow or hide Glimpse
⇧S / Shift+SShow or hide the Stage panel
⌃` / Ctrl+`Go to the Claude panel from anywhere (open it, or put the keys in its prompt). From its terminal, close it
`Make the panel you work in fill the window. Press it again to put the layout back. Not while you type in a field (Make a panel fill the window)
⇧I / Shift+IShow or hide the frame-rate display (the FPS HUD). The bare i sets the start of the work area
vToggle the viewer: the surfaces the selection feeds show the result of the selected nodes, in a thin grey frame. The viewer button at the top right of the graph does the same
fFocus: show and draw only the surfaces the selection feeds. Press it again to see every surface
sOpen the scene list. In the open list, s types in its search field: press Esc to close the list. Over the timeline, s splits a layer instead
⌘PageUp / Ctrl+PageUp, ⌘PageDown / Ctrl+PageDownGo to the previous / next scene, from anywhere (Scene › Previous Scene, Next Scene). [ and ] alone set the timeline's work area, and only over the timeline
⇧⌘ / Ctrl+Shift + an arrowDock the node graph to the left, right, top or bottom edge. A hidden graph shows again
⌃⌘F / F11Full screen on or off (View › Enter Full Screen on a Mac, View › Full Screen on Windows)
Drag the dividerChange how much space the canvas and the node graph get
Drag the grip on the dividerMove the node graph to another edge. Esc cancels
Drag a panel's ⠿ grip or nameDock, stack, pin or float the panel, or drop it on another title row to make tabs (Float, dock and pin). Esc cancels
⌃Tab / Ctrl+Tab, ⌃⇧Tab / Ctrl+Shift+TabIn a group of tabs: show the next or the previous tab (Put panels together as tabs)
Drag the edge or corner of a floating or pinned panelResize the panel
Drag a rail's inner line, or the line between two stacked panelsResize the rail, or share the space between the two panels
Drag the empty strip at the topMove the window. Double-click it to zoom (Mac) or maximize (Windows)
Alt or F10 (Windows)Go to the menu bar. Alt + a letter opens a menu (On Windows)

Palette and compose

Keys for the command palette and ⌘K compose. See The command palette and Compose a change with Claude.

/Open the command palette. Not while you type in a field, and not in the Claude terminal (there it goes to Claude)
⌘/ / Ctrl+/, ⌘K / Ctrl+KOpen or close the command palette, from anywhere: also from a text field and the Claude terminal. The two keys do the same thing
↑ / ↓ in the paletteMove up and down the list. With nothing typed: through the recent rows, then the tiles, one row of tiles at a time
↑ at the top of an empty paletteBring back the words you sent before. ↑ again for older words, ↓ for newer words
← / → in the paletteMove between the tiles. In a list, they move the cursor in the text
⏎ / Enter in the paletteRun the selected row: a command, a tile (it lists its group), or ask Claude. A command that needs text (text, clock, save layout…) asks for it, then ⏎ / Enter creates. Type /gen to open the New Generation form instead
⌘⏎ / Ctrl+Enter in the paletteSend your words to the Claude tab in front, whatever row is selected
⇧⌘⏎ / Ctrl+Shift+Enter in the paletteOpen a new Claude tab and send your words there
⌫ / Backspace in an empty paletteLeave a group: back to all the tiles
Point at a row, click itPick the row, then run it
Esc in the paletteClose the palette. While it asks for text, Esc goes back to the list
Click outside the paletteClose the palette
On the openrouter planner⏎ / Enter on plan with OpenRouter: … plans the change. The plan runs at once only if all its generations cost $0. Otherwise it waits until you click approve. With no key, the palette shows a button that opens Settings › Keys

Fields, lists and dialogs

Keys for small text fields, drop-down lists and dialogs everywhere in the app.

⏎ / Enter in a name fieldKeep the new name: a scene, an asset, a folder, a marker, a version, a Claude tab
Esc in a name fieldCancel and keep the old name. A click away keeps a marker's or a tab's new name, and cancels a scene's
⏎ / Enter in a Settings text fieldSave the value. Esc puts back the saved value. In an API key field, Esc cancels the entry. In the media cache and folder fields, Esc closes Settings
⏎ / Enter, ↓ or ↑ on a drop-down listOpen the list. Space does not open it: outside a panel it stays play / pause, and in a panel it does nothing
Type in an open listA long list (more than 20 rows) has a search field: type to filter it. In a short list, typing jumps to a match, and Space picks the row
↑ / ↓, Page Up / Down, Home / End in an open listMove through the rows
⏎ / Enter in an open listPick the row. Esc closes the list. Tab closes it and moves on
⏎ / Enter in the New Project nameMake the project. Esc closes the sheet
Esc on a right-click menuClose the menu (a click outside it does too). The menu has no arrow keys: click an item
Middle-drag a number fieldThe value ladder: drag up / down to pick the step, sideways to change the value. Esc puts the value back (Edit a value)

Canvas

Mouse and keys on the canvas, where you see your surfaces. See Canvas.

ClickSelect the layer under the pointer, at the node graph's current level. If a ✥ transform places the layer, the click selects that transform. At the top level, a click on a surface that shows a comp selects the comp
Double-click a compGo inside the comp: select the transform of the layer under the pointer, and step the node graph into the comp. Inside, double-click a comp layer to go one level deeper (Select a layer)
Click another surface, or EscAfter a double-click into a comp: go back to the top level
Click empty canvasClear the selection, and go back out of a comp you went into with a double-click. With ⇧, ⌘, ⌃ or ⌥ (Shift, Ctrl, Alt) held, the selection stays
⇧ / Shift-click, ⌘ / Ctrl-click or ⌥ / Alt-clickAdd the layer to the selection, or take it out
⌃ / Ctrl-clickAdd or remove the layer too. On a Mac it never opens the right-click menu
Right-clickOpen the menu for the layer, the surface or the empty canvas under the pointer (Menus)
Right-drag, or a two-finger click-and-drag on a Mac trackpadDraw a box. Let go to select every layer it touches, at the node graph's current level. ⇧ / Shift, ⌘ / Ctrl or ⌥ / Alt adds them to the selection (Select several layers)
Drag the selected layerMove it. Its centre snaps to the centre of its surface and of the other layers. If you picked the content in the graph, the drag selects and moves its transform. A layer locked in the timeline never moves
Drag a layer that is not selectedMove its surface, not the layer. Click the layer first to select it
Drag a corner or edge handleScale the layer
⇧ / Shift while scalingKeep the proportions
⌥ / Alt while scalingScale from the centre
Drag the rotate knobTurn the layer
Drag the ringed crosshairMove the pivot (the point it turns and scales around) without moving the layer
Drag an animated layerSet a keyframe at the playhead for each animated property you change. The other keyframes stay. If keyframes of that property are selected in the timeline, move those keyframes instead (Change an animated layer)
⌘ (Mac) / Ctrl (Windows) while dragging a layerTurn the centre snap off and snap the layer's edges instead: to its surface's edges, its surface's guides, and the layers beside it (Snap with ⌘ / Ctrl). Press or let go of the key during the drag
⌥R (Mac) / Alt+R (Windows)Show or hide the rulers. Drag from a ruler to make a guide (Rulers and guides)
⌘; (Mac) / Ctrl+; (Windows)Show or hide the guides. Hidden guides do not snap
Drag a guide · double-click a guideMove it (drop it on a ruler to delete it) · type its position
⇧ / Shift-dragMove only across or only up and down: for a layer, its pivot or a surface. Press or let go of the key during the drag to switch
Click a surface's name tagSelect the surface
Drag a surface, or its name tagMove the surface on your canvas. It snaps to the edges, centres and gaps of the other surfaces. You can drag a selected surface from up to 8 px outside its edge
⌘ (Mac) / Ctrl (Windows) while dragging a surfaceNo snapping. The surface goes exactly where you drag it
Drag empty canvasPan (move the view)
Middle-button dragPan, anywhere: also over a surface or a layer. It never selects, moves or opens anything
Scroll, or pinch on a trackpadZoom in or out around the pointer. ⌘ / Ctrl-scroll zooms too. A pinch and Ctrl-scroll zoom faster
⇧ / Shift-scrollPan. With a mouse wheel it pans sideways; on a trackpad it pans every way. A sideways swipe also pans sideways
⇧1 / Shift+1Fit every surface in the view. While focus is on, fit the surfaces that show. Over the node graph, it fits the graph
The fit button, bottom rightFit every surface in the view, like ⇧1 / Shift+1
1Actual size: show the canvas at 100% (View › Actual Size)
+ / −Zoom in / out (= and _ work too). Over the timeline, they zoom time
← → ↑ ↓Move the selected layer or surface 1 px, when the canvas is the last place that you clicked. A layer locked in the timeline does not move. With a comp or clock selected, the arrows move through the graph instead
⇧ / Shift + an arrowMove the selection 10 px
⌥ / Alt + an arrowMove the selection 0.1 px. With ⇧ / Shift held too, ⌥ / Alt wins
An arrow on an animated layerSet a keyframe at the playhead. If keyframes of x or y are selected in the timeline, move those keyframes instead: select them all to move the whole animation
Double-click a pathEdit its points (Pen and paths). The path must be at the node graph's current level
Drop an image file, or an image tile from AssetsPlace it on the surface you drop it on (Drop media on a surface). On empty canvas, it goes to the centre of the scene's first comp. When the graph is inside a comp, it goes into that comp
Drop a video or audio tile from AssetsA video tile makes a video layer. An audio tile makes an audio node, with sound and no picture
Drop a video, audio or font fileImport it into Assets only
  • ⌘Z / Ctrl+Z puts a moved surface back. One drag, or arrow presses in a row, is one undo step (Arrange the surfaces).
  • Surfaces hidden by focus do not take clicks, do not snap and do not move with the arrows.

Pen and paths

Keys for drawing a path with the pen, and for editing its points. See Draw a path or a mask.

/, then penStart the pen to draw a new path
⇧M / Shift+MStart the pen to draw a mask for the selected layer
Start the pen over a surfaceYou draw on that surface
ClickPlace a corner point. If the pen started over empty canvas, the first click on a surface picks the surface. A first click on empty canvas does nothing
DragPlace a smooth point and pull out its handles. ⇧ / Shift keeps the handle straight across or up and down
⇧ / Shift-clickPlace the point in a straight line (across or up and down) from the last one
Click the first pointClose the path and finish. The path needs at least 3 points
⏎ / Enter while drawingFinish an open path. With fewer than 2 points, it cancels the path
⌫ / Backspace while drawingRemove the last point (Delete works too). Removing the only point cancels the path
Esc while drawingCancel the path
Scroll while drawingZoom, as usual. A drag does not pan. A middle-button drag pans
View keys while drawingWhile you draw or edit a path, the view keys do nothing: f (focus), ⇧1 / Shift+1 (fit), 1, +, −, v and ⇧I / Shift+I. Space does nothing too. Finish the path (⏎ / Enter) or cancel it (Esc) first
Drag a point or a handleMove it, while you edit a path. ⇧ / Shift keeps it in a straight line
Drag the pill on a handle's stemTurn and scale both handles together
Click a segmentAdd a point there. Press and drag to add a point and move it
⌥ / Alt-click a pointRemove the point (⌘ / Ctrl-click works too, and ⌃-click on a Mac). A path keeps at least 2 points
⌫ / Backspace while editingRemove the point under the pointer
Double-click a pointSwitch it between corner and smooth
Double-click a handleLine up the other handle with it (a smooth point)
Drag the feather knobSoften the edge of a mask path. Esc during the drag puts it back
The arrows while editingMove the whole path layer, not one point
Esc or ⏎ / Enter while editingStop editing the path. A click away from the path does the same. Esc during a point or handle drag stops editing and keeps the move

Node graph

Mouse and keys in the node graph, where each layer is a node. See Node graph and Gesture reference.

ClickSelect a node
Click empty graphClear the selection
⇧ / Shift-click, ⌘ / Ctrl-click or ⌥ / Alt-clickAdd the node to the selection, or take it out
⌃ / Ctrl-clickAdd or remove the node too. On a Mac it never opens the right-click menu
Right-dragDrag a box to select every node it touches. You can start on a node too. ⇧ / Shift adds them
Right-click a nodeOpen the node menu, with colour swatches. On a node in the selection, it acts on the whole selection (Menus). An effect chip has its own effect menu
Right-click empty graphCreate a layer, add a note, fit the graph, reset its layout or hide the graph (Menus)
Drag a nodeMove the node in the graph. If it is in the selection, the whole selection moves
Drag a dial's nameMove a clock, audio or video dial. A drag on the rest of the dial moves through time
Drag the handle beside the scene clock's nameMake the scene clock bigger or smaller. Double-click the handle for the normal size (Make the scene clock bigger)
⌥ / Alt-drag a nodeMove the layer into a transform, group or surface. Inside a comp, the comp's own node is a target too. A matte node cuts one layer to the shape of another. Drop on its top half to make the layer the content. Drop on its bottom half to make it the matte
⌥ / Alt-drag an effect chipMove the layer that has the effect
Drag a comp's output dotLet go on a surface: the comp now shows on that surface (it feeds the surface)
⌥ / Alt-drag a compFeed a surface too
Drag a feed wire, or a surface's input dotFeed another surface. Let go anywhere that is not a surface to remove the feed
Click a feed wireSelect the wire. ⌫ / Backspace or Delete removes the feed. Esc deselects it
Drag empty graphPan (move the view)
Middle-button dragPan, also over a node or a note. It never selects or moves a node
Scroll, or pinch on a trackpadZoom in or out around the pointer, from 15% to 300%. ⌘ / Ctrl-scroll zooms too
Scroll over a dialStep the playhead one frame for each click of the mouse wheel (⇧ / Shift: 10 frames). A pinch or ⌘ / Ctrl-scroll over a dial still zooms (Scrub to a time)
⇧ / Shift-scrollPan. With a mouse wheel it pans sideways; on a trackpad it pans every way. A sideways swipe also pans
Double-click a compGo inside the comp. Click a name in the address bar at the top to go back out
Double-click empty graphFit the graph in the view
⇧1 / Shift+1 with the pointer over the graphFit the graph in the view. The fit button at the bottom right does the same
→ / ←Select the next node toward the surface / toward the sources (after a click in the graph, not on the canvas). With several sources, ← picks the top one
↑ / ↓Select the nearest node above / below, also in another branch. A node in the same column comes first. At the top and the bottom of the graph, it stops
Double-click a sticky noteEdit its text. Esc, ⌘⏎ / Ctrl+Enter or a click outside finishes (Notes)
⏎ / Enter on a selected noteEdit the note
⌫ / Backspace on a selected noteDelete the note (Delete works too). Esc deselects it
Right-click a noteThe note menu: colour, edit, remove
Drag a note, or its cornerMove the note, or resize it
Drag across a clock dialMove through time (scrub). Drag left or right: 240 px is one turn. It pauses playback. ⇧ / Shift moves 4× slower. On an audio or video dial, 480 px covers the whole clip
Click a dial's centrePlay or pause
Click the time on a clock dialShow time in seconds or in frames, everywhere in the app
‹ / › by the scene dial's centreStep one frame. Hold to repeat. ⇧ / Shift steps 10 frames
Click a dial's cue bandAdd a cue (a named moment) there, in a gap between cues
Drag a cue around the bandMove the cue
Drag a cue onto another clock dialAdd a trigger: that clock starts when this clock reaches the cue. The target must be a named clock, not the scene dial
Click a keyframe tick on a dialSelect the keyframe. Properties opens at that property
Drag a keyframe tick on a dialMove the keyframe in time, between its neighbours
Drag a ◇ chip from Properties onto a dialAnimate that property on that clock
Drop a file or an Assets tileAdd it at the graph level you are on: images, video and audio (Drop a file or asset)

Properties

Mouse and keys in the Properties panel. See Properties.

Drag a field's labelChange the value by dragging (scrub): one step for each pixel. ⇧ / Shift is 10 times finer
↑ / ↓ in a number fieldStep the value up / down. ⇧ / Shift steps 10 times more
Type in a number fieldThe value changes as you type. ⏎ / Enter leaves the field
Middle-drag a numberThe value ladder: drag up / down to pick the step, sideways to change the value. Esc puts it back
Click ◇Add a keyframe at the playhead. On a keyframe (◆), remove it. The last keyframe of a track stays
Drag ◇ onto a clock dialAnimate the property on that clock. Esc during the drag cancels
Right-click a rowOpen the property menu
⌘F / Ctrl+F over PropertiesFilter the fields by name. The magnifier button in the title row does the same
⏎ / Enter or Esc in the filter⏎ / Enter keeps the filter and hides the field. Esc clears the filter (not the panel)
+ add effect…: ↓, ⏎ / Enter or SpaceOpen the effect picker
Type in the effect pickerFilter the effects. The arrows move around the grid. Home / End go to the first / last one
⏎ / Enter in the effect pickerAdd the effect. Esc or Tab closes the picker
Click the gradient barAdd a colour stop
Drag a colour stopMove it. Pull it off the bar to remove it. Esc during the drag cancels
Click a colour stopEdit its colour
← / → on a selected stopMove the stop 1%. ⇧ / Shift moves it 10%
⌫ / Backspace on a selected stopRemove the stop (Delete works too). A gradient keeps at least 2 stops

Timeline keys

These keys work while the pointer is over the timeline's layers view. They act on the selected layers, or else on the layer under the pointer. See Timeline keys.

⌥[ / Alt+[ / ⌥] / Alt+]Set the in / out point (where the layer starts / ends) at the playhead. These are the After Effects trim keys
sSplit the layer in two at the playhead
dDuplicate the layer in place
⌘D / Ctrl+DDuplicate the layer in place
⌘C / Ctrl+CCopy the layers
⌘V / Ctrl+VPaste the layers at the playhead
← / →Move the playhead one frame. ⇧ / Shift moves it 10 frames
⌥← / Alt+←, ⌥→ / Alt+→Move the selected layers one frame, with their keys. Add ⇧ / Shift for 10 frames
⌥⌘← / Alt+Ctrl+←, ⌥⌘→ / Alt+Ctrl+→Move only the in and out points of the selected layers one frame. The keys stay
↑ / ↓Jump to the previous / next edit point: an in or out point, a marker, an end of the work area, or the start or end of the loop
+ / −Zoom time in / out around the playhead (= and _ work too). If the playhead is off screen, around the middle
0Fit the whole loop (the 0 above the letters; the keypad's 0 is the RAM preview)
[ / ]Set the start / end of the work area (the part that loops) at the playhead. i / o do the same from anywhere
nTurn snapping on or off. Frames always snap. ⌘ (Mac) / Ctrl (Windows) during a drag changes it while you hold the key. ⌥ / Alt during a drag turns all snapping off
\Add a marker at the playhead
⇧\ / Shift+\Add a layer marker on the selected video layers
EscClear the selected keyframes, then the selected layers, then close the timeline

Timeline mouse

Mouse actions in the timeline's layers view. Each layer has a bar in the track area, to the right of the names. The bar shows when the layer plays in the loop. See Timeline.

Press or drag the rulerMove through time (scrub). It pauses and snaps to frames
Scroll, or pinch, over the barsZoom time around the pointer. ⌘ / Ctrl-scroll zooms too
⇧ / Shift-scrollPan through time. On a trackpad it also scrolls the rows. A sideways swipe also pans time
Scroll over the layer namesScroll the rows
Scroll over the time in the headerStep the playhead one frame for each click of the mouse wheel. Add ⇧ / Shift for 10 frames (Scrub to a time)
Click a layer nameSelect the layer. On a group row, select the group. ⇧ / Shift- or ⌘ / Ctrl-click a group row to add the group to the selection, or take it out
⇧ / Shift-click a layer nameSelect all the layers from the last one you clicked
⌘ / Ctrl-click a layer nameAdd the layer to the selection, or take it out
⌘ / Ctrl-click a barAdd the layer to the selection
⇧ / Shift-click a barAdd the layer to the selection, or take it out
Double-click a comp's nameGo inside the comp
Drag a layer nameMove the layer up or down the stack, or drop it into a group or transform
▸ on a rowOpen the layer to see its lanes (one row per animated property)
↳ on a rowGo inside the comp that the layer uses
Drag the edge of a bar, top halfTrim: move the in or out point
Drag the edge of a bar, bottom halfSlip a video: change which part of the video plays, and keep the bar where it is. On other layers it trims
Drag a bar, top halfCopy: a ghost follows, and the drop makes a copy
Drag a bar, bottom halfMove the layer in time. A selection moves together. Other layers never move
⌥ / Alt while dragging a barSwitch between copy and move, and place it freely, between frames
⌘ (Mac) / Ctrl (Windows) while dragging a bar, a keyframe, a marker or the work areaChange the snapping while you hold the key: off when it is on, on when it is off (Snap with ⌘ / Ctrl)
Right-click a bar › Move In/Out OnlyThe next drag of that bar moves only its in and out points. The keys stay. Esc cancels
c while dragging a barSwitch between copy and move
Esc while draggingCancel the drag and put everything back. The timeline stays open, and the selection stays
Double-click a barMake the layer play for the whole loop again
Drag in an empty part of the track areaDrag a box to select the layers and keyframes it touches. ⇧ / Shift or ⌘ / Ctrl adds them. Hold the box at the top or bottom edge to scroll the rows
⇧ / Shift-drag a barStart a selection box from the bar
Click an empty part of the track areaClear the selected keyframes. With none, clear the selected layers
Right-click a bar, a keyframe, a lane, a marker, the ruler or an empty rowOpen its menu (Menus)
eye switchBypass (turn off) the layer
fx switchBypass the layer's effects
solo switchShow only this layer while you work. Export ignores it
lock switchLock the layer: canvas clicks pass through it, and the timeline will not edit it
Double-click the rulerAdd a marker there. ⌥ / Alt places it between frames
Drag a markerMove the marker
Click a markerMove the playhead to it
Double-click a markerGive the marker a name. ⏎ / Enter or a click away keeps it; Esc cancels
A layer marker on a video barDrag it along the clip (⌘ / Ctrl: change the snapping; ⌥ / Alt: no snapping). Click it to move the playhead there. Double-click to name it. Right-click for its menu
⚑ in the headerList the markers. Click one to go there. Its × removes it
snap in the headerTurn snapping on or off, like n
scope in the headerPick what the timeline shows. With focus on it, ↑ / ↓ or ⏎ / Enter open its list
× in the headerClose the timeline
Drag the work-area bandMove one end of the work area, or all of it
Double-click the work-area bandClear the work area: the whole loop plays
Click rows in the headerMake the rows taller or shorter: 22, 32 or 44 px
Drag the top edge of the timelineMake the timeline taller or shorter

Keyframes

Keyframes on a layer's lanes in the layers view. A keyframe is a value at a moment in time. Click ▸ to open the layer first. See Add, move, delete keys.

Click a keyframeSelect it
⇧ / Shift-click a keyframeAdd it to the selection, or take it out
Drag a keyframeMove it in time. It snaps to frames (⌥ / Alt does not). A selection moves together
Double-click a laneAdd a keyframe there. On a keyframe, remove it
Double-click a keyframeOpen its curve in the curves view, with the keyframe selected
Right-click a keyframeEase, edit curve…, delete keyframe (Menus)
◇ on a laneAdd a keyframe at the playhead, or remove the one there
‹ / › on a laneJump to the previous / next keyframe
∿ on a laneOpen the lane in the curves view (Open a lane's curve)
Type or ladder a lane's valueAdd a keyframe at the playhead with that value. If a keyframe is already there, change it
⌫ / BackspaceDelete the selected keyframes (Delete works too)
← / →Move the selected keyframes one frame. ⇧ / Shift moves them 10 frames
EscClear the keyframe selection

Curves view

The timeline's other view (⌥T / Alt+T). It shows one cycle of the selected layer's clock (the timer that plays its keyframes), with one lane for each curve. See Edit in the curves view and Curves and eases.

Click a keyframeSelect it
⇧ / Shift-click a keyframeAdd it to the selection, or take it out
Drag an empty part of a lane's graphDrag a box to select that lane's keyframes. ⇧ / Shift adds them. A click clears the selection
Double-click an empty part of a lane's graphAdd a keyframe. Its value comes from the curve
Drag a keyframeMove the selected keyframes in time and in value. Time snaps to frames (⌥ / Alt does not)
⇧ / Shift while dragging a keyframeMove only in time, or only in value: the way you moved most
Drag a handleChange the shape of the curve next to the keyframe
⌥ / Alt while dragging a handleMove one handle alone, or both together (it switches unified / broken for this drag)
Esc while draggingCancel the drag
← / →Move the selected keyframes by 1% of the cycle. ⇧ / Shift moves them 5%. With the pointer over a clock dial, the arrows step one frame instead, and the keyframes stay
⌫ / BackspaceDelete the selected keyframes (Delete works too). A lane keeps its last one
EscClose the timeline
Right-click a keyframeEase, delete keyframe (Menus)
Double-click the gate laneAdd a gate span (a stretch where the layer shows)
Drag a gate span, or its edgesSlide the span, or trim it. Right-click it to delete it
Right-click a cue lineRemove the cue
Press or drag the rulerMove through time (scrub)
Scroll over a graphZoom time around the pointer, for all lanes
Scroll sideways, or ⇧ / Shift-scroll with a mouseMove through time
⌥ / Alt-scroll over a graphZoom that lane's values
⇧ / Shift and scroll up or down on a trackpadMove that lane's values up or down
Scroll over the lane namesScroll the list of lanes
Drag the bottom edge of a laneMake all lanes taller or shorter (48 to 480 px)
Drag the top edge of the panelMake the panel taller or shorter

Curves view tools

The tools at the right of the curves view's header. They work on the selected keyframes. See Curves and eases.

t / v fieldsType the time in the cycle (1.5s, 45f, 250ms) or the value. ⏎ / Enter uses it. Esc leaves it unchanged
An ease buttonSet the ease (the shape of the motion) after each selected keyframe (Set an ease)
The steps fieldSet the number of steps for a steps(n) ease
unified / broken buttonSwitch the handles of a keyframe: unified keeps both on one line, broken lets each move alone
frame allFit the whole cycle and every curve
selFit the time and the values to the selected keyframes
×Close the timeline

Stages

Keys in the Stage panel, the 3D room where you plan a shot. While the panel has the keys, the keys you press alone (with no ⌘ / Ctrl) are the stage's. The panel takes the keys when it opens, and again when you click inside it (not in a text field). Shortcuts with ⌘ / Ctrl still work. Click the canvas to use its keys, for example Space, g and s. See Stages.

wMove handles on the selected item. It slides on the ground
⇧ / Shift while movingLift the item off the ground
eTurn handles on the selected item
rSize handles on the selected item
pPose mode on the selected figure: click a joint, then turn it. Press p again, or w, e or r, to leave pose mode
cSwitch between the camera view (through the lens) and the free view
fFrame the selection. In the camera view, point the camera at it
xSnap for moves. It starts at 0.1 m. Press x for 1 m, again for off, again for 0.1 m. While moves snap, turns snap to 15°
← → ↑ ↓Move the selected item 0.1 m on the ground, in the direction you look. A locked item does not move
⇧ / Shift + an arrowMove it 1 m
⌥ / Alt + an arrowMove it 0.01 m
⌫ / BackspaceRemove the selected item, not while it is locked (Delete works too)
EscGo back one step: pose mode, then the selection, then the camera view, then close the Stage panel
Click an itemSelect it
DragTurn the view around (orbit). In the camera view, it moves the camera
Right-drag, or ⇧ / ⌘ / Ctrl-dragPan the view. In the camera view, it moves the camera
Scroll, or middle-dragMove the view nearer or farther. In the camera view, it moves the camera
⌥ / Alt-scroll over the frameChange the lens, in the camera view
⏎ / Enter in the lens (mm) fieldUse the lens you typed. Esc puts the old value back (it does not close the panel)
Esc in a text field of the stage panelCancel the edit only
Double-click a body sliderReset it to ×1
⇧1 / Shift+1Nothing in the panel. The status line says the canvas’s keys: click the canvas, then f to focus or ⇧1 to fit
b, ⇧M / Shift+M, vNothing in the panel. They stay in it, so they never change the canvas behind it. Click the canvas to use them

Generations and preview

Keys in the Generations panel and the generation preview. See Generations and Preview an output.

n in the Generations panelStart a new generation
↑ / ↓ in the Generations panelMove through the jobs. An open preview follows. Focus must be in the panel
⇧-click / Shift-click a jobSelect every job from the last job you clicked to this one, as the list shows them
⌘-click / Ctrl-click a jobAdd the job to the selection, or take it out. On a Mac, Control-click does the same
⇧↑ / ⇧↓ (Shift+arrows)Make the range of selected jobs one job longer or shorter
Esc with several jobs selectedGo back to one job: the last one you clicked. With one job selected, Esc closes the panel
Click a finished jobShow its output large, over the canvas
Double-click a row or cardPut its reference into the Claude prompt (as mention in Claude does)
⏎ / Enter on a jobShow its output. Press it again to close the preview
1 to 6Grade the selected jobs or the output on show: circled, select, hold, soft, NG (no good), ref. The same key again clears it
0Clear the grade
Click NG in the previewGrade it NG. Starlight asks why. A key grade does not ask
⌘Z / Ctrl+Z after a gradeUndo the grade
← / → in the previewShow the previous / next output in the panel's list. Over the timeline, the timeline's keys come first
Click a video in the previewPause or play it. Drag its scrub bar to move through it
Space in the previewPlay or pause the scene, as usual
Esc in the previewClose the preview (not the panel)
⌘⏎ / Ctrl+Enter in the New Generation formSend the job
Esc in the New Generation formClose an open input picker first. Then go back to the job list
Keys that edit the canvasNothing while the preview covers the canvas. ⇧1 / Shift+1 over the graph still fits the graph

Glimpse

Keys in the Glimpse room. Click into the room first. See Look around the room.

w a s d or the arrowsWalk, in walk mode. In orbit mode these keys do nothing
q / eGo down / up, from 0.4 m to 3.2 m above the floor
⇧ / Shift while walkingWalk faster: 4.5 m a second instead of 1.9 m
DragLook around (walk mode, any mouse button), or turn around the room (orbit mode)
Right-drag (orbit mode)Pan the view. It stays inside the room
ScrollMove forward or back (walk mode), or zoom (orbit mode)
Two-finger drag on a touch screenWalk
Double-click the roomGo back to the starting view. This stops the tour
▶ tourPlay the guest tour: a walk through the room, in a loop. The button shows only when the venue has a tour. While it plays, keys and drags do nothing
■ tour, walk, orbit or a camera buttonStop the tour

Claude panel

Keys in the Claude panel. While its terminal has focus, your typing goes to Claude, and most ⌘ / Ctrl shortcuts still work. See Keys in the terminal.

⌃` / Ctrl+`Go to Claude from anywhere: open the panel, or put the keys in its prompt. From the terminal, close the panel. Claude keeps running
⇧Esc / Shift+EscLeave the terminal. The panel stays open. A plain Esc goes to Claude
⇧⏎ / Shift+EnterStart a new line in your message instead of sending it
⌘S / Ctrl+S, ⌥⌘S / Ctrl+Alt+SSave the open scene, or save all scenes, also from the terminal. Claude never gets these keys
⌘ keys (Mac)Starlight's, also from the terminal, except ⌘C ⌘V ⌘X ⌘A. ⌃ + a letter goes to Claude
Ctrl+K, Ctrl+/, Ctrl+,, Ctrl+PageDown, Ctrl+PageUp, F11 (Windows)Starlight's, also from the terminal. Every other Ctrl + letter goes to Claude
Click +Start a new chat (or pick an earlier one to resume)
Click ↻Restart this chat: Claude starts again in this tab with the same conversation
Click a tabBring that chat to the front
× on a tabClose that chat. Its session ends
Right-click the panelOpen the Claude menu
Right-click a tabOpen the tab menu: rename, restart or close that tab
Double-click a tabRename the tab. ⏎ / Enter or a click away keeps the name; Esc cancels
Drag a tabChange the order of the tabs
Scroll over the tabsScroll the row of tabs
⌘C / Ctrl+CCopy the selected text. On Windows, with nothing selected, Ctrl+C stops Claude
⌘V / Ctrl+VPaste into the terminal
Ctrl+Shift+C / Ctrl+Shift+V (Windows)Always copy / paste, never stop Claude
⌃V (Mac)Goes to Claude Code, which uses it to paste an image

On Windows

Most keys are the same with Ctrl in place of ⌘. These are the places where Windows is different.

Alt or F10Go to the menu bar. Press it again to leave. In the Claude terminal these keys go to Claude
In the menu bar← / → or Tab / Shift+Tab move. ⏎ / Enter, Space or ↓ opens a menu. A menu's letter opens it. Esc leaves
Alt+S, Alt+F, Alt+E, Alt+V, Alt+C, Alt+G, Alt+W, Alt+HOpen the Starlight, File, Edit, View, Scene, Gen, Window or Help menu (not in the Claude terminal). While you hold Alt, the letters are underlined
Ctrl+OThe Open dialog takes a project folder only, not a project.yaml file
Ctrl+YRedo (Edit › Redo). In a text field it redoes your typing; elsewhere it redoes the scene, like Ctrl+Shift+Z
Ctrl+W, Ctrl+MClose or minimize the window. Closing asks Save changes? first when anything is unsaved (Alt+F4 too)
F11Full screen on or off
Ctrl while draggingChange the snapping while you hold the key: a surface stops snapping, a layer snaps, and a timeline drag does the opposite of the snap button (⌘ on a Mac, Snap with ⌘ / Ctrl)
Ctrl-scroll on the canvas or graphZoom faster, as a trackpad pinch does
Ctrl+C in the Claude terminalCopies the selected text. With nothing selected, it stops Claude
Ctrl+Shift+C / Ctrl+Shift+V in the Claude terminalAlways copy / paste

On this page