Skip to Content
Starlight

The workspace

The workspace is the whole window: the canvas, the node graph, the timeline, and the panels you open when you need them.

There is no toolbar. Most areas have a key, an item in the Window menu and a command in the command palette. You can arrange the panels as you like.

The areas and their keys

Each area of the window, the key that opens and closes it, and what it is for.

AreaOpen / closeFor
Canvasalways openEvery surface at its true pixel size. You select, place and judge here.
Node graphgThe scene as a graph of nodes: layers, comps, clocks and their links.
Timeline⇧T / Shift+TLayers and keyframes in time, along the bottom. It opens in the view you used last. ⌥T / Alt+T, or the two view icons in its header, change the view. Its curves view shapes the eases.
Properties⇧P / Shift+PEvery setting of what you selected.
Assets⇧A / Shift+AImages, video, audio and fonts: import, place and replace.
Generations⇧G / Shift+GAI images, video and upscales, with their grades.
Glimpse⇧R / Shift+RThe real room in 3D, with the live canvas on its walls.
Claude⌃` / Ctrl+`Claude Code in a terminal, working in this project.
Stage⇧S / Shift+S, Window › Stage, or open stage in the palettePlan a shot in 3D before you generate. Esc leaves the stage.
Settings⌘, / Ctrl+, or the gearIts sections: project, keys, generation, media, appearance and diagnostics.
This guide? or the ? buttonHelp for every part of Starlight. Esc, ✕ or a click outside it closes it.
  • The right-click menu of the empty canvas also opens and closes the graph, the timeline and every panel (Menus).
  • Press ` (the backtick key) to make the area you work in fill the window. Press it again to put the layout back (Make a panel fill the window).

Open and close a panel

Properties, Assets, Generations, Glimpse, Claude and Stage are panels: small windows inside the workspace.

  1. Press the panel's key (see the table above), or choose it in the Window menu. The menu item has a ✓ while the panel is open.
  2. To close it, press the same key again, or click × in its title row.
  • A closed panel opens again in the same place.
  • The first time, a panel floats near the middle of the window. The Claude panel is different: it docks on the right edge.
  • Keys that you type inside a panel stay in that panel. Shortcuts with ⌘ / Ctrl still work, and so does ` outside a text field (Make a panel fill the window).
  • Press Esc to close the panel you are working in. In a group of tabs, Esc closes only the tab in front. In a text field, Esc does not close the panel.
  • The title row has the ⠿ grip, the panel's name, sometimes a short note or a switch, and ×.

What each title row shows:

PanelName in the title rowExtra in the title row
PropertiespropertiesThe name of what you selected, or select a node. The magnifier button opens a filter for the fields (⌘F / Ctrl+F does the same).
AssetsassetsNothing.
Generationsgenerations🔍 to search the jobs, $ for the money left on each service, and the compact / detail switch: one line per job, or cards.
GlimpseglimpseNothing.
ClaudeclaudeNothing. Its chat tabs are in the panel, under the title row.
  • With nothing selected, a floating Properties panel shrinks to its title row and one line. Then it does not cover the graph or the canvas.
  • The Claude panel needs room for its terminal. If you open it on a rail thinner than 460 px, the rail widens to 460 px once.

Float, dock and pin a panel

Drag a panel to a new place. It can float, dock to an edge (a rail), stack with other panels, or pin to a point.

  1. Press on the panel's ⠿ grip or its name.
  2. Drag. An outline shows where the panel will go. A label tells you how far it reaches, for example full height, full width, canvas height or graph width. In a stack, the label adds the place, for example · 2 of 3.
  3. Release to drop it there. Press Esc during the drag to cancel.

Where you release decides what happens:

Release the panel…Result
On another panel's title row, or on its tabsThe two panels become tabs in one panel. The label says add as tab (Put panels together as tabs).
Against the window edge (the last 24 px)A rail the full height or width of the window, beside the canvas and the graph.
Right at an edge that already has a rail (the last 12 px)A new column beside that rail (the label says · new column).
A little further in from that edge (12 to 24 px)The panel joins that rail's stack.
On the line between two columns (within 10 px)A new column between them.
At the outer edge of a canvas or graph rail (the last 12 px)A new column in that area, beside the rail.
On a docked panelThe panel joins that stack, before or after the panel under the pointer.
Near a corner, the middle of an edge, or the centre of the window (within 90 px)The panel is pinned there at its own size. It stays there when the window changes size.
Just inside the edge of the canvas or the graph (within 40 px)A rail only as tall or wide as that area (canvas height, graph width).
Anywhere elseThe panel floats where you drop it.
  • The rows are in order: the first row that fits wins. So a drop on a title row always makes tabs, and a drop on a docked rail always docks, even near a pin point.
  • A click on the title row without a drag changes nothing.
  • Example: with the graph at the bottom, Glimpse at canvas height leaves the graph the full width.
  • To float a docked panel again, drag it away from the edge.
  • Starlight remembers the arrangement for each project. A project that you open for the first time starts with your latest arrangement.

Put panels together as tabs

Two or more panels can share one place as tabs. The group can float, dock on any edge, stack or pin, like one panel. Its title row shows one tab for each panel.

  1. Press on a panel's ⠿ grip or its name.
  2. Drag it onto the title row of another panel. The row lights up, and the label says add as tab, for example add as tab · 2 of 3. A small line shows where the new tab goes.
  3. Release. The two panels are now tabs in one panel.
  • Click a tab to show that panel. The tab in front has an outline and a line under it.
  • Drag a tab along the row to change the order.
  • Drag a tab off the row to take it out of the group. Drop it on an edge, a stack, a pin point or another title row. Or release it anywhere to float it there. Press Esc during the drag to put it back.
  • × on a tab closes that tab. The × at the end of the row closes the whole group.
  • The ⠿ grip moves the whole group. Drop a group on another title row to put the two groups together.
  • Press ⌃Tab / Ctrl+Tab to show the next tab, and ⌃⇧Tab / Ctrl+Shift+Tab for the previous one. This works while you are in the panel.
  • In a group, Esc closes the tab in front, not the whole group.
  • A panel's key brings its tab to the front, for example ⇧P / Shift+P for Properties (all the keys: The areas and their keys). If its tab is already in front, the key closes it. A closed tab keeps its place in the group, and its key brings it back there.
  • When only one tab is left, the group becomes a normal panel again.
  • A drop on a title row always adds a tab. To stack panels, drop on a panel's body instead. To make a rail at the top of the canvas or the graph, drop at the top edge of that area.
  • A hidden tab stops work it does not need. Glimpse stops drawing while its tab is hidden. Claude keeps running behind its tab. Assets and Generations keep their place, for example the open folder or a form you have not finished.
  • Layouts (Window › Layouts) save and restore tab groups too.

Resize a panel

Change how much space a panel, a rail or a stack takes.

  1. For a rail, drag its inner line (the line next to the canvas).
  2. For two stacked panels, drag the line between them.
  3. For a floating or pinned panel, drag any edge or corner.
  • A rail is at least 220 px thick. A panel in a stack keeps at least 120 px.
  • A floating or pinned panel is at least 240 px wide and 160 px tall.
  • The canvas and the graph each keep at least 240 px.
  • The timeline's top edge sets its height: from 120 px up to 70% of the window.

Move the graph, resize the split

The node graph sits beside or below the canvas. At first it is on the right. You can move it to any edge.

  1. To resize, drag the line between the canvas and the graph.
  2. To move the graph, drag the ⠿ in the middle of that line. The window edge nearest the pointer lights up. Release to move the graph there. Press Esc to cancel.
  3. Or hold ⇧⌘ / Ctrl+Shift and press an arrow key. The graph moves to that edge. If the graph is hidden, it shows again.
  • Press g to hide or show the graph.
  • While the graph is hidden, panels docked in it move into the canvas. They go back when the graph returns.

Save and restore a layout

A layout is a saved arrangement of the panels. Use layouts to switch quickly between ways of working.

Save a layout.

  1. Arrange the panels the way you want.
  2. Choose Window › Layouts › Save Layout…, or type save layout… in the command palette.
  3. The palette asks for a name. Type it and press ⏎ / Enter.

Restore a layout.

  1. Choose Window › Layouts, then the layout's name. Or type layout: <name> in the palette.
  2. The panels move at once, fitted to this window.

Delete a layout.

  1. Choose Window › Layouts › Delete Layout, then the name. Or type delete layout: <name>.
  • Default (layout: default in the palette) is the original layout. Every panel is closed, and the graph is on the right of the canvas. When you open Claude, it docks on the right edge.
  • A layout keeps which panels are open, where each one is, the rail sizes, and the graph's edge and split.
  • A layout never changes the scene, the selection or the view. It also keeps nothing of the timeline's view, the time units or the Claude tabs.
  • Layouts belong to you, not to a project, so you can use them in every project.
  • A name can have up to 40 characters. Capital letters do not count: Edit and edit are the same name.
  • You can keep up to 30 layouts. If you save with a name that exists, Starlight asks before it replaces that layout.
  • Default cannot be saved over or deleted, so you cannot use the name default.
  • A delete has no undo. Delete Layout is grey while you have no saved layouts.

Make a panel fill the window

Press ` (the backtick key) to make the panel you work in fill the whole window. The other panels are hidden for a while. They are not closed. Press ` again to put the layout back. The key works as in After Effects.

  1. Click in the panel that you want to make big. Do not click in a text field: there, ` types a backtick.
  2. Press `. The panel fills the window. Its title row shows ` restore.
  3. Work in the panel as usual.
  4. Press ` again, or click ` restore. Every panel goes back to its place.

Which panel fills the window. Starlight takes the first one in this list:

  1. The panel that has the keyboard focus, for example after you pressed a button in it.
  2. The panel that you clicked last, or that had the keyboard focus last. For example, after ⇧Esc / Shift+Esc in the Claude terminal, this is the Claude panel.
  3. The panel under the pointer.
  4. The canvas.

This works for every area: the canvas (also with the viewer on), the node graph, the timeline, Properties, Assets, Generations, Glimpse, Stage and Claude. A panel can be floating, docked or pinned. A group of tabs fills the window as one panel: click a tab to show another panel of the group.

Other ways. Choose View › Maximize Panel, or type maximize panel / restore in the command palette. Both work like the key. The menu item has a ✓ while a panel fills the window.

  • The layout comes back exactly as it was: the sizes, the dividers, the tabs, the floating panels and the scroll positions.
  • Starlight does not save it. A saved layout never includes it, and it is not an undo step.
  • If you open or close a panel, or choose a layout, the full layout comes back first. A panel that you open shows in its own place.
  • Esc still closes the panel that you work in. Then the other panels come back.
  • You cannot drag or resize a panel while it fills the window.
  • On the canvas and on the node graph, ` restore is a button at the top right.
  • In a text field, ` types a backtick. In the Claude terminal too. To make the Claude panel fill the window, press ⇧Esc / Shift+Esc first and then `. Or choose View › Maximize Panel.
  • On some keyboards, the same key types another character: ^ on a German keyboard, ² on a French keyboard. The key works there too.
  • ⌃` / Ctrl+` goes to the Claude panel: it opens the panel, or puts the keys in its prompt. From inside the terminal it closes the panel (Open the Claude panel).
  • Hidden panels stop drawing while they are hidden. For example, Glimpse stops drawing. Playback, sound, video and Claude go on.

The top-right buttons

The buttons at the top right of the window, from left to right.

On Windows they are in the title bar, at its right end. They sit just left of the minimize, maximize and close buttons (The Windows title bar).

ButtonWhat it does
Scene nameThe open scene. Click the scene name, or press S, to open the scene list. Click it again to close the list (Open the scene list). An amber dot before it means unsaved changes. +2 unsaved after it means two other scenes have unsaved changes: point at it to see their names. Right-click it for open, rename scene, duplicate scene, new scene and delete scene (Menus).
PadlockShared projects only. It shows who is editing this scene. Click it to lock, unlock or take over (Lock a scene).
saved …A note such as "saved 12s ago", after a save. It hides when you have unsaved changes.
🔊The audio monitor. Click it to set volume, mute and the output device (system default or another one). It changes only what you hear, never an export. When muted it shows 🔇 and muted.
vVersions. Every save is a version. Each row says when it was made, its name, and in one short line what changed. Click a row to go back to it. Click ✎ to name it, then press ⏎ / Enter (Esc cancels). The newest is marked current (Save and go back).
?Opens this guide. You can also press ? anywhere outside a text field.
GearOpens Settings at project (⌘, / Ctrl+,). Click it again to close Settings.
  • Settings is also in the menu: Starlight › Settings….
  • A click outside the audio monitor closes it.

The canvas and the graph have a few controls of their own:

  • At the top right of the canvas: the focus button (Canvas focus). To open the Stage panel, press ⇧S / Shift+S or choose Window › Stage (Stages).
  • At the top right of the graph: the viewer button (v). It shows the selected node's result on the canvas (Viewer).
  • At the bottom right of the canvas, and of the graph: a small fit button. It fits every surface, or the whole graph, in the view (like ⇧1 / Shift+1).
  • At the bottom left of the canvas: play, the time and the frame rate (Transport). Click the time to switch between seconds and frames.
  • Along the very bottom of the window: a thin bar that shows how far the loop has played. It hides while the timeline is open.

Questions and messages

When Starlight needs an answer, or has news for you, a small box opens in the middle of the window. It looks like the rest of Starlight, on a Mac and on Windows. The window behind it goes darker. The canvas keeps playing.

  • The first line is the question. The grey text under it says more.
  • The buttons are at the bottom right. The button at the right end is the default. It is the one that has the focus.
  • A red button does something you cannot easily undo: it deletes, drops unsaved changes or stops an export. Read the question before you click it.
  • Press ⏎ / Enter to click the button that has the focus. Press Tab to move the focus to the next button.
  • Press Esc, or click ✕, to cancel. Nothing changes.
  • While the box is open, the keys do not reach the rest of the app. When it closes, the focus goes back to where it was.
  • Only one box opens at a time. If Starlight has a second question, it opens after you answer the first.
  • The boxes that pick a file or a folder are still the ones of your computer.
  • If the window cannot show the box (for example, it stopped answering), your computer's own message box asks instead.

About Starlight: version and system

The About box shows which Starlight you have and what it found on this computer. It looks the same on a Mac and on Windows.

  1. Click Starlight › About Starlight. On Windows, the Starlight menu is the first menu in the title bar.
  2. Or open the command palette and run about starlight.
LineWhat it shows
versionThe app version and the day this copy was built, for example version 0.2.15 · built 2026-10-22. If the line ends with dev, this copy runs from the source code. It is not an installed app
systemThe operating system and the graphics processor (GPU), for example macOS 26 · Apple M3 Max or Windows 11 · RTX 4070 Ti SUPER. On a Mac with Apple silicon, the GPU is part of the chip, so the line shows the chip
exportThe format an export uses when you do not choose one, and what makes the file: the GPU (VideoToolbox, NVENC, AMF or Quick Sync) or the CPU. For example ProRes 422 HQ (VideoToolbox) on a Mac, or HEVC 10-bit (NVENC) on Windows. See HEVC 10-bit and the encoders
  • Click help to open this guide.
  • Click diagnostics to open Settings at Diagnostics. There you can save the logs for support.
  • Just after Starlight starts, the box's export line can show checking… for a short time. Starlight tests the encoders one time only, when it starts.
  • You can select the text and copy it, for example into a message to support.
  • To close the box, press Esc, click ✕, or click outside the box.
  • On a Mac, if no Starlight window is open, About Starlight opens the window first.

Run any command: the command palette

The command palette is one bar. It finds and runs any command by name: create, effects, views, scenes, files, layouts and more. It also sends your words to Claude. Three keys open it, and they all do the same thing.

  1. Press / (outside a text field), ⌘/ / Ctrl+/ or ⌘K / Ctrl+K. The palette opens near the top of the window.
  2. Type a few letters of the command. For example, type lev for levels, or exp sc for export scene.
  3. The best match is selected. To pick another row, press ↑ ↓, or move the pointer over it.
  4. Press ⏎ / Enter, or click the row, to run it.

A row. Each row shows an icon, the full name of the command, its group in grey, and its key at the right. A long name goes onto a second line. The palette never cuts a name off.

With nothing typed, the palette shows two parts:

  • recent: the last 4 commands that you ran. The first one is selected, so ⏎ / Enter runs it again.
  • browse: a tile for each group of commands, 5 tiles in a row. Each tile shows an icon, the group's name and how many commands it has.

To see the commands of one group:

  1. Click a tile. Or move to it with the arrow keys and press ⏎ / Enter.
  2. The palette lists the commands of that group. The group shows as a small label (a chip) in the input.
  3. Type to search in that group only.
  4. To go back to all the groups, press ⌫ / Backspace in the empty input. Or click × on the chip.

Words for Claude. When you type, the last two rows of the list send your words to the Claude panel:

  • ask Claude: … sends them to the Claude tab in front. Its grey text names that tab, for example tab 2 · N surface looks. Key: ⌘⏎ / Ctrl+Enter.
  • ask Claude in a new tab opens a new tab in the Claude panel and sends them there. Key: ⇧⌘⏎ / Ctrl+Shift+Enter.

When your words are not clearly a command, ask Claude moves to the top, and it is selected. Then ⏎ / Enter sends your words. The commands that match some of your words come below it, under commands. How the palette decides, and what Claude gets: Compose a change with Claude.

  • To close the palette, press Esc, press ⌘/ / Ctrl+/ or ⌘K / Ctrl+K again, or click outside it.
  • / works on the canvas, in the graph and in a panel, when you do not type in a field. In a field, it types a slash.
  • In the Claude terminal, a bare / goes to Claude, for Claude's own slash commands. ⌘/ and ⌘K (Ctrl+/ and Ctrl+K) open the palette there.
  • Words that you did not send stay in the palette when you close it with Esc. When it opens again, they are selected: type to replace them, or press ⏎ / Enter to use them.
TypeWhat you get
text, clockThe field asks for the words (it shows TOUCHDOWN…) or the clock name. Press ⏎ / Enter again to create it. Esc goes back to the list. A new layer goes where you are working (Add a node).
Another layer typeFor example rectangle, pen, image or adjustment layer. It is created at once. add or new before the name works too: add text, new gradient.
An effect's name or jobFor example levels, add glow or white balance. It goes on the selected layer. With nothing selected, it goes on a new adjustment layer. The grey text says where it goes. A grey row says why it cannot apply. If you pick it, Starlight shows the full reason and changes nothing.
A scene's nameopen N or open: <scene> opens it.
layoutSave, restore and delete layouts (see above). save layout… asks for the name in the same field.
A graph gestureFor example marquee. The row's grey text tells you how to do it. Running it opens this guide at the gestures. seconds ⇄ frames is different: it switches the time units at once.
A sentence, or a questionask Claude comes first. Press ⏎ / Enter to send it to Claude (Compose a change with Claude).

The groups of the browse tiles:

GroupWhat is in it
canvasFit, zoom, rulers, guides, frame guides, focus and the frame rate.
layerEvery layer type to create: text, rectangle, ellipse, line, pen, gradient, image, cutout, audio, video, clone, adjustment layer, clock, and the layer types of the project's extensions. Also bypass, the masks, scale to fit, pre-comp and comps.
timelineThe timeline and its two views, play / pause, the frame, keyframe and marker steps, and the loop.
graphThe node graph, the viewer, the graph gestures and show graph hints again.
effectsEvery effect.
generateThe Generations panel, new generation…, generate from comp… and sync generations.
exportexport scene, export scene · full track and export reel.
glimpseThe Glimpse panel and the stages: Stage panel, open stage, new stage.
projectNew, open and reload a project, the Projects screen, save, recovery, the project folder and extensions. Also the scenes: new, next, previous, the scene list, and open: <scene> for each scene.
panelsShow and hide Properties, Assets and Claude, make a panel fill the window, and the layouts.
appsettings…, help, about starlight, recent messages…, undo and redo.
  • Matches at the start of a word come first. Then the commands you ran last come before other commands that match as well.
  • Commands also match other words. For example, circle finds ellipse, preferences finds settings…, and fit all finds fit view. Old names also work: previz finds the Glimpse panel.
  • The commands that are in no menu are listed in Commands only in the palette.

Move the window

Drag the window by its title bar, the strip along the top.

On a Mac:

  1. Press on an empty part of the top strip. Examples: beside the top-right buttons, or above the canvas or the graph.
  2. Drag to move the window. Double-click to zoom or minimize it (as set in System Settings › Desktop & Dock).
  • Some docked panels put their title row in this strip, next to the red, yellow and green window buttons. These are the top panel of a left or right rail, and every panel of a top rail.
  • In that title row, only the ⠿ grip and the name move the panel. The empty part moves the window.
  • A floating panel moves by its whole title row.

On Windows:

  1. Press on an empty part of the title bar at the top, or on the project name in its middle.
  2. Drag to move the window. Double-click to maximize it, or to make it small again.
  3. Use the buttons at its right end to minimize, maximize or close.
  • Click a menu name to open it. While a menu is open, move the pointer to another name to open that menu.
  • Press Alt or F10 to use the menus from the keyboard. ← → move, Enter, Space or ↓ open a menu, and Esc leaves the menus.
  • Alt + a letter opens a menu directly. While you hold Alt, that letter is underlined.
  • The title bar is the only bar at the top. From left to right: the app icon and the menus, then the project name in the middle, then the scene name and the top-right buttons (The top-right buttons).
  • The canvas, the graph and the panels at the top start right below the title bar.
  • In a narrow window, the project name gets shorter first and ends with …. Then the scene name does. Point at the scene name to see all of it.

See the frame rate

The FPS HUD is a short line that shows how many frames you really see each second, out of the scene's fps. It sits in the transport row, at the bottom left of the canvas.

  1. Press ⇧I / Shift+I, or choose View › Frame Rate. In the palette, type toggle fps hud or frame rate.
  2. Press ⇧I / Shift+I again to hide it.

What each number means: See how fast the canvas draws.

Messages, and the ones you missed

Short messages appear at the top centre of the window. For example: saved 02-walls.yaml, or undid: transform.

  • A normal message goes away after 2 to 10 seconds. A longer message stays longer, so you have time to read it. Click it to hide it sooner.
  • A warning (amber) or an error (red) stays until you click its ✕. For example, SAVE FAILED — … stays, so you always see that a save did not work.
  • Several warnings and errors can show at once, one under the other.

To read a message again:

  1. Choose Help › Recent Messages…. Or press / and type recent messages.
  2. The list shows every message since Starlight started, newest first: the time, the kind (info, warning or error) and the words. It keeps the last 50.
  3. Press Esc, click ✕ or click outside the list to close it.

Light or dark

Starlight follows your system's light or dark mode. You can also pick one for yourself.

  1. Open Settings: click the gear, or press ⌘, / Ctrl+,.
  2. Click appearance.
  3. Click system, light or dark.
  • The choice belongs to you, not to the project. It stays the same in every project.
  • In light mode, the area around the surfaces stays mid grey. So you never judge LED colours against white (Settings › Appearance).

On this page